Pip/pop/pbp – Dell W1900 User Manual

Page 26

Using the On-Screen Display

www

.del

com |

ppo

rt.

ll.

FILE LOCATION: D:\Dell_DAO_W1900_OM_final\W1701_19000S\W1701_1900e40.fm

D E LL C O N F ID E N T IA L – P R E L I M I N A RY 1 1 / 2 2/ 0 4 – FO R PR O O F O N LY

PIP/POP/PBP

You can view two active sources simultaneously using Picture-In-Picture (PIP), Picture-Outside-

Picture (POP), or Picture-By-Picture (PBP).
For POP, you can select from three different POP options:

•

POP1

—

One large POP window to the left and a smaller, centered window on the right.

•

POP3

—

One large POP window to the left and three smaller, vertically-aligned windows on

the right.

•

POP12

—

One large, centered POP window surrounded by twelve smaller windows.

The remote control offers the following

PIP/POP/PBP options:
•Use the PIP button or the POP PBP button

on the remote control to turn on and off PIP,

POP, and PBP.
•If you are in PIP, POP, or PBP mode, use the

SWAP button on the remote control to

switch between the two windows.
•Use the

POS button on the remote to

change which corner of the screen the PIP

window appears.
In the OSD, you can adjust the

Transparency, the Size, and H (horizontal)

and

V (vertical) position of the PIP/POP/PBP

windows. When you are selecting the horizontal orientation, - moves the window left and + moves

the window to the right. When you are adjusting the vertical orientation, 0 is at the top of the

screen and 100 is at the bottom of the screen.
POP Scan Mode allows you to select Sequential or Float. Float mode plays the source for selected

channels that appear in the windows.

Sequential rotates through each window and plays all of the

preselected channels. The rotation runs through all the available channels before it starts again at

the lowest channel.

SIZE

TRANSPARENCY

PIP/POP/PBP

BACK

PIP SOURCE

VERTICAL POSITION

HORIZONTAL POSITION

AUDIOS SOURCE

PIP/POP/PBP

PIP

MAIN