Selecting your osd language, Input select menu – Dell W1900 User Manual

Page 24

Using the On-Screen Display

www

.del

com |

ppo

rt.

ll.

FILE LOCATION: D:\Dell_DAO_W1900_OM_final\W1701_19000S\W1701_1900e40.fm

D E LL C O N F ID E N T IA L – P R E L I M I N A RY 1 1 / 2 2/ 0 4 – FO R PR O O F O N LY

Selecting Your OSD Language

Press Menu to enter the OSD.

Select Setup.

In the Setup menu, select Language and select the language that you want the OSD to

appear in.

Input Select Menu

The Input Select menu allows you to select the proper source based on how you have your TV

display and video equipment connected. Press

Input on the remote to go directly to the Input

Select menu. You can also press Menu and select Input Select from the main menu.

VGA — Select when your TV display is being used as a

computer monitor and you have connected the computer

using a VGA cable. See "Bottom View" on page 8 for the

location of the VGA connector.
DVI — Select when your TV display is being used as a

computer monitor and you have connected the computer

or when you have connected a device, such as a DVD

player using the DVI cable. See "Bottom View" on page 8

for the location of the DVI connector.
TV — Select when you have your antenna or cable TV

box connected to the ANT/Cable connector. See "Bottom

View" on page 8 for the location of the coaxial connector.
AV1 (COMPOSITE) — Select when you have a video

device, such as a video game system, connected to the

composite connector on the side of the TV display. See

"Left Side View" on page 7 for the location of the

composite connector.

AV2 (S-VIDEO) — Select when you have a video device, such as a VCR, connected to the S-Video

connector on the side of the TV display. See "Left Side View" on page 7 for the location of the S-Video

connector.
AV3 (COMPONENT 1) — Select when you have a video device, such as a DVD player, connected to the

component connector. See "Bottom View" on page 8 for the location of the component connector.
AV4 (COMPONENT 2) — Select when you have a video device, such as a DVD player, connected to the

component connector. See "Bottom View" on page 8 for the location of the component connector.
SHOW INPUTS — Show Inputs allows you to select Active or All. Active searches for which connectors

are being used. The available input sources appear in white and input sources that are not available appear

in grey. All shows all the input sources and allows you to select all the input sources even if you do not have

a device connected.

NOTE:

In OSD Settings, located in the Setup menu, you can set the Input Select to display the device

that you have attached. For example, AV2 would say DVD when you view the Input Select menu.

I N P U T S E L E C T

EXIT

VGA

DVI

AV1 (COMPOSITE)

AV2 (S-VIDEO)

AV3 (COMPONENT 1)

AV4 (COMPONENT 2)

SHOW INPUTS

ALL