Setting up your tv display, Proper location for your tv display, Connecting your tv display – Dell W1900 User Manual
Page 11: 2 setting up your tv display
Setting Up Your TV Display
11
2
Setting Up Your TV Display
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the
Product Information Guide
.
Proper Location for Your TV Display
Consider the following environmental factors when you are deciding where to put your TV display:
• Do not store or use the TV display in locations that are exposed to high heat, direct sunlight,
or extreme cold.
• Avoid moving the TV display between locations with extreme temperature differences. For
more information, see Specifications on page 39.
• Do not subject the TV display to severe vibration or high impact conditions. Do not place the
TV display inside a car trunk.
• Do not store or use the TV display in locations where the TV display would be exposed to
high humidity or dusty environment.
• Do not place the TV display in a location where water or other liquids could spill on or into
the TV display.
Connecting Your TV Display
Your TV display has four standard connectors that can be used to connect devices.
NOTE:
Before you connect your TV display, ensure you have all the proper cables. Some cables may
come with the device you are connecting. For a list of cables that came with your TV display, see
Package Contents on page 9. To order additional cables, contact Dell.
Quality
Cable and Connector
When to Use
Good
Coaxial (RF) carries the video and audio
from one cable. The coaxial connector is
labeled, ANT/Cable on your TV display. To
locate the connector, see page 8.