Dell W1900 - Manual (Page 15)

Setting Up Your TV Display 15
Using the S-Video Connector
1 Turn off the TV display and unplug the power cord.
2 Connect your device including the audio cables.
3 Plug in the power cords for the TV display and devices and turn them on.
4 Enter the OSD and select the AV2 (S-Video). For additional information about the Input
Select menu, see page 24.
Using the Component Connectors
1 Turn off the TV display and unplug the power cord.
2 Connect your device including the audio cables.
3 Plug in the power cords for the TV display and devices and turn them on.
4 Enter the OSD and select the AV3 ( Component 1) or AV4 ( Component 2). For additional
information about the Input Select menu, see page 24.