Step 6, Mobile broadband cards – Dell Latitude D820 User Manual
Page 62
b.
Release the card by spreading the metal securing tabs until the card pops up slightly.
c.
Lift the card out of its connector.
6.
Install the card:
a.
Move any antenna cables out of the way to make space for the WLAN card.
b.
Align the card with the connector at a 45-degree angle, and press the card into the connector until it clicks.
7.
Connect the antenna cables to the WLAN card, ensuring that you route the cables correctly.
Mobile Broadband Cards
1.
.
2.
Remove the hinge cover (see
3.
Remove the keyboard (see
1
antenna cables
1
WLAN card
2
metal securing tabs (2)
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
NOTE:
Do not insert a Mobile Broadband network card into the WLAN card slot.
NOTE:
The WLAN card may have two or three connectors, depending on the type of card you ordered.
NOTICE:
To avoid damaging the WLAN card, never place cables on top of or under the card.
NOTE:
Your WLAN card may have two or three connectors, depending on the type of card you ordered. Most connectors have color-coded markings that
correspond to the type of cable required.
NOTE:
For more specific information about which cable to connect to which connector, see the documentation that came with your WLAN card.