Dell Vostro 500 (Mid 2009) - Manual (Page 30)

1 display panel 2 top flex-cable connector
3 bottom flex-cable connector
Replacing the Display Panel
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
1. Follow the instructions in Before You Begin .
2. Connect the top flex-cable connector to the display connector.
3. Connect the bottom flex-cable connector to the inverter connector.
4. Replace the eight screws (four on each side of the display panel) to secure the display brackets to the display panel.
5. Align the screw holes on the display bracket with the corresponding screw holes and guide pins on the top cover and
gently lower the display panel into place.
6. Replace the two screws that secure the display panel to the cover.
7. Replace the display bezel (see Replacing the Display Bezel ).
8. Replace the display assembly (see Replacing the Display Assembly ).
9. Replace the keyboard (see Replacing the Keyboard ).
10. Replace the center control cover (see Replacing the Center Control Cover ).
Back to Contents Page