Dell Vostro 500 (Mid 2009) - Manual (Page 10)

Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
Dell™ 500 Service Manual
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you
begin working inside the computer.
Removing the Internal Card With Bluetooth® Wireless Technology
1. Follow the procedures in Before You Begin .
2. Remove the center control cover (see Removing the Center Control Cover ).
NOTE: You do not have to remove the keyboard to access the internal card with Bluetooth wireless technology.
3. Remove the screw securing the card.
4. Disconnect the cable from the card.
1 card 2 securing screw
Replacing the Internal Card With Bluetooth® Wireless Technology
1. Connect the cable to the card.
2. Place the card in position and replace the securing screw.