Speaker, Speaker assembly: dell 500 service manual, Speaker assembly – Dell Vostro 500 (Mid 2009) User Manual
Page 22: Removing the speaker assembly, Replacing the speaker assembly
Speaker Assembly
Dell™ 500 Service Manual
Removing the Speaker Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
1. Follow the instructions in
2. Remove the center control cover (see
Removing the Center Control Cover
3. Remove the keyboard (see
4. Remove the Mini-Card (see
).
5. Disconnect the speaker cable connector from the system board.
6. Remove the four screws securing the speaker assembly to the base of the computer.
7. Remove the speaker assembly.
1 screws (4)
2 speaker cable connector
3 speaker assembly
Replacing the Speaker Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
1. Align the guide holes in the speaker assembly with the guide posts on the base of the computer, then lower the
assembly into place.
2. Replace the four securing screws.
3. Route the speaker cables carefully through the routing channel.
4. Connect the speaker cable to the system board.