Dell POWEREDGE M1000E - Manual (Page 28)

Fabric OS v7.1.0a Release Notes v1.0 Page 28 of 41
Power Supply Requirements for Blades in DCX/DCX-4S
Blades Type of Blade
DCX/DCX-4S
@110 VAC
(Redundant
configurations)
DCX/DCX-4S
@200-240 VAC
(Redundant
configurations)
Comments
FC10-6 1 , FC8-
16, FC8-32,
FC 8-48, FC8-
64
Port Blade 2 Power
Supplies
2 Power Supplies
 Distribute the Power Supplies
evenly to 2 different AC
connections for redundancy.
FR4-18i 1 Intelligent
Blade Not Supported 2 Power Supplies
FS8-18,
FX8-24,
FCOE10-24 Intelligent
Blade Not Supported DCX: 2 or 4 Power
Supplies
DCX-4S: 2 Power
Supplies
 For DCX with three or more
FS8-18 Blades, (2+2)
220VAC Power Supplies are
required for redundancy.
 For DCX with one or two
FS8-18 Blades, (2) 220VAC
Power Supplies are required
for redundancy.
 For DCX-4S, (2) 220VAC
Power Supplies provide
redundant configuration
with any supported number
of FS8-18 Blades.
 For both DCX and DCX-4S
with FX8-24 blades, (1+1)
220VAC Power Supplies are
required for redundancy.
Table 3 Power Supply Requirements for DCX and DCX-4S
1. Note that FC10-6 and FR4-18i are not supported with FOS v7.1 or later