beautypg.com

Dell Dimension 4600 User Manual

Page 39

background image

6.

 

Turn off the monitor and disconnect it from the electrical outlet.

7.

 

Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system board.

8.

 

Remove the computer cover

.

9.

 

Locate the 3-pin password jumper (CLR PASSWRD) on the

system board

and attach the jumper to pins 1 and 2 to reenable the password feature.

10.

 

Replace the computer cover

.

 

11.

 

Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page

 

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

See also other documents in the category Dell Computers: