Dell Dimension 4600 - Manual (Page 37)

Boot Sequence
This feature allows you to change the boot sequence for devices.
Suspend Mode The options are S1 or S3.
AC Power Recovery Determines what happens when AC power is restored to the computer.
l Off (default) — The computer remains off when AC power is restored.
l On — The computer starts when AC power is restored.
l Last — The computer returns to the AC power state existing at the time that AC power was lost.
Low Power Mode The settings are Enabled and Disabled.
See "Power Problems" in your Owner's Manual for more information.
System Security
Display system security options when you press .
Keyboard NumLock
The settings are On and Off (these settings do not apply to 84-key keyboards).
On (default) Activates the rightmost bank of keys so that they provide the mathematical and numeric functions shown at the top of each key.
Off Activates the rightmost bank of keys so that they provide the cursor-control functions shown by the label on the bottom of each key.
Report Keyboard Errors
Displays keyboard errors when set to Report. The default setting is Report.
Auto Power On
Sets time and days of week to automatically turn on the computer. Choices are every day or every Monday through Friday.
Time is kept in a 24-hour format (hours:minutes). Change the start-up time by pressing the right- or left-arrow key to increase or decrease the numbers, or
type numbers in both the date and time fields.
The default setting is Disabled.
This feature does not work if you turn off your computer using a power strip or surge protector.
Fastboot
On (default) Your computer starts more quickly, skipping certain configurations and tests.
Off Your computer does not skip certain configurations and tests during the boot process.
OS Install mode
Turns the OS Install mode on and off. The default setting is Off.
IDE Hard Drive Acoustics Mode
The acoustics mode field may contain the following options:
Quiet The hard drive operates in its quietest setting.
Performance The hard drive operates at its maximum speed.
NOTE: Switching to performance mode may cause the drive to be noisier, but its performance is not affected.
Bypass (default) Your computer does not test or change the current acoustics mode setting.
Suggested The hard drive operates at the level suggested by the hard drive manufacturer.
NOTE: Changing the acoustics setting does not alter your hard drive image.
System Event Log
Displays the system event log when you press .
Asset Tag
Displays the customer-programmable asset tag number for the computer if an asset tag number is assigned.