Dell Dimension 4500S User Manual
Page 40
40
S o l v i n g Pr o b l e m s
www
.dell.com | support.dell.com
I
F
THE
POWER
LIGHT
IS
OFF
—
The computer is either turned off or is not
receiving power.
• Ensure that the power cable is firmly inserted into both the power connector
on the back of the computer and the electrical outlet.
• If the computer is plugged into a power strip, ensure that the power strip is
plugged into an electrical outlet and that the power strip is turned on.
• Ensure that the electrical outlet is working by testing it with another device,
such as a lamp.
• Ensure that the voltage selection switch is set to match the AC power at your
location (see page 7).
• Bypass power protection devices, power strips, and power extension cables to
verify that the computer turns on.
• Swap the computer and monitor power cables to determine if the power cable
is defective.
• Ensure that the microprocessor power cable is securely connected to the
system board (see page 65).
• Ensure that the power supply cables are securely connected to the system
board (see page 65).
• If the problem persists, contact Dell (see page 84).
I
F
THE
POWER
LIGHT
IS
STEADY
AMBER
—
The computer is receiving
electrical power, but an internal power problem might exist.
• Ensure that the power cable is firmly inserted into both the power connector
on the back of the computer and the electrical outlet.
• Ensure that the voltage selection switch is set to match the AC power at your
location (see page 7).
• Ensure that the microprocessor power cable is securely connected to the
system board (see page 65).
• Ensure that the power supply cables are securely connected to the system
board (see page 65).
• If the problem persists, contact Dell (see page 84).
I
F
THE
POWER
LIGHT
IS
BLINKING
AMBER
—
A device might be
malfunctioning or incorrectly installed.
• Remove and then reinstall the memory modules (see page 70).
• Remove and then reinstall any cards (see page 66).
• If the problem persists, contact Dell (see page 84).