Dell Latitude 10e ST2E (Early 2013) - Manual (Page 22)

Keystroke Action
connected to an
optional external USB
keyboard)
On Screen Mouse
Pointer Use this to navigate the System Setup by using your finger or an interactive pen.
Apply Icon Save current configuration.
Defaults Icon Load setup defaults.
Exit Icon Exits System Setup.
Boot Menu
Press when the Dell logo appears to initiate a one-time boot menu with a list of the valid boot devices for the
system. Hard Drive Network Diagnostics and Enter Setup options are included in this menu. The devices listed on the
boot menu depend on the bootable devices in the system. This menu is useful when you are attempting to boot to a
particular device or to bring up the diagnostics for the system. Using the boot menu does not make any changes to the
boot order stored in the BIOS.
System Setup (BIOS) Options
Table 1. System Information
Option Function
BIOS Version Displays the BIOS revision.
Service Tag Displays the service tag of your tablet.
Asset Tag Displays the asset tag of your computer.
Ownership Tag Displays the ownership information.
Manufacture Date Displays the date of manufacture.
Ownership Date Displays the ownership date.
Memory Installed Displays the memory installed on the computer.
Memory Available Displays the memory available on the computer.
Memory Speed Displays the memory speed.
Table 2. Battery Information
Option Function
AC Adapter Displays the AC Adapter information.
Battery Status Displays the current battery status.
Battery Charge State Displays if the battery is charging/discharging.
Battery Health Displays the battery health.
22