Dell Latitude 10e ST2E (Early 2013) - Manual (Page 15)

4. Remove the screws that secure the docking board to the computer.
5. Remove the docking board from the computer and disconnect the home-button board cable.
Installing the Docking Board
1. Connect the home-button board cable to the docking board and place the docking board in its slot in the computer.
2. Tighten the screws to secure the docking board to the computer.
3. Connect the docking-board power cable to the connector.
4. Install the:
a) front camera
b) speaker
c) battery
d) base cover
5. Follow the procedures in After Working Inside Your Computer .
15