Dell PowerEdge VRTX - Manual (Page 28)

• The Dell PowerEdge VRTX Getting Started Guide shipped with your system provides an overview of
system features, setting up your system, and technical specifications.
• The setup placemat shipped with your system provides information on the initial system setup and
configuration.
• The server module Owner's Manual provides information about the server module features and
describes how to troubleshoot the server module and install or replace the server module
components. This document is available online at dell.com/poweredgemanuals.
• The Updating Servers of M1000e Chassis and Using in VRTX Chassis provides information on updating
M1000e server modules to be used in the VRTX chassis, using the Chassis Management Controller.
This document is available online at dell.com/esmmanuals.
• The rack documentation included with your rack solution describes how to install your system into a
rack, if required.
• The I/O module documentation at dell.com/poweredgemanuals describes the features of the I/O
module installed in the VRTX enclosure.
• The Dell Shared PowerEdge RAID Controller (PERC) 8 User's Guide provides information about
deploying the Shared PERC 8 card and managing the storage subsystem. This document is available
online at dell.com/poweredgemanuals.
• The Upgrading PowerEdge VRTX to Support Fault Tolerant Shared PERC 8 Information Update
provides information on upgrading to fault-tolerant Shared PERC 8. This document if available online
at dell.com/poweredgemanuals.
• The Dell Chassis Management Controller for Dell PowerEdge VRTX User’s Guide provides information
on installing, configuring and using the Chassis Management Controller (CMC). This document is
available online at dell.com/esmmanuals.
• The Dell PowerEdge VRTX Chassis Management Controller Firmware Event Message Reference Guide
provides information on the error and event messages generated by the firmware or other agents that
monitor system components. This document is available at dell.com/esmmanuals.
• The CMC Online Help provides information and instructions for the current page on the CMC web
interface. To access the Online Help, click Help on the CMC web interface.
• The Integrated Dell Remote Access Controller (iDRAC) User’s Guide provides information about
installation, configuration and maintenance of the iDRAC on managed systems. This document is
available online at dell.com/esmmanuals.
• Dell systems management application documentation provides information about installing and using
the systems management software.
• For the full name of an abbreviation or acronym used in this document, see the Glossary at dell.com/
support/manuals.
• Any media that ships with your system that provides documentation and tools for configuring and
managing your system, including those pertaining to the operating system, system management
software, system updates, and system components that you purchased with your system.
NOTE: Ensure that all the component software are upgraded to the latest versions. For information
on the latest supported firmware and driver versions, see the Drivers & Downloads link
on dell.com/support/drivers, for your system.
NOTE: Always check for updates on dell.com/support/manuals and read the updates first because
they often supersede information in other documents.
28