Canon CDP-E074-030 - Manual (Page 36)

36
Using the Software on the Macintosh
Platform – The Basics
This chapter explains the procedures for using ImageBrowser to download the camera's images
to the computer and print them.
Proceed to this chapter after completing the preparations in the Using the Software on the
Macintosh Platform
–
Preparations section.
Downloading Images to the Computer
Begin by downloading the images to your computer. The downloading procedure is slightly
different depending on whether you are using a camera to computer connection (see below) or
a memory card reader (p. 39).
Camera to Computer Connection
1
After connecting the supplied interface cable to the computer’s USB port and the
camera’s DIGITAL terminal, turn on the camera power, set it to playback mode and
prepare it to communicate with the computer.
CameraWindow displays when the camera and computer are set to the mode to
communicate. (Images are not downloaded at this point.)
• You may not be able to download images when the camera is connected to a
computer if there are a large number of images (approximately 1000) on the
memory card. Use a memory card reader to download in that case.
• Movie files take time to download since the files are large.
Procedures for attaching the camera to the computer and placing the
camera in the correct mode for connecting vary between camera models.
See the Camera User Guide.
CO
PY