Cabletron Systems EMM-E6 - Manual (Page 10)

Chapter 1: Introduction
1-2 EMM-E6 Installation Guide
Chapter 3, Installation , details the procedures to follow when unpacking,
testing, and installing the EMM-E6. This chapter contains information
and step-by-step instructions for connecting network cabling to the
EMM-E6 and closes with a procedure which may be used to test the
operation of the EMM-E6 in the network.
Chapter 4, Troubleshooting , describes how to use LANVIEW LEDs on
the EMM-E6. The chapter defines the different LED conditions and
provides a table of simple troubleshooting instructions for module-related
difficulties.
Appendix A, Specifications , provides the physical specifications and
operating requirements of the EMM-E6. This appendix also contains
serial port pinout tables for constructing Local Management cables.
Appendix B, Upgrading the EMM-E6 , details the procedures that must
be followed when expanding the capabilities of the EMM-E6. This
appendix contains information on memory upgrades and the addition of
EPIM modules to the EMM-E6.
Appendix C, Ethernet Cabling Requirements , describes the test
characteristics that Ethernet cables must adhere to in order to be
standards-compliant. Any Ethernet link or cable that is to be connected to
the EMM-E6 should be verified to be within the specifications and
limitations provided in this appendix.
ICH1Book Page 2 Tuesday, August 6, 1996 3:06 PM