P. 156), S.] to [disable, Checking connection information – Canon 300 HS User Manual
Page 156: Disabling eye-fi transfer, Choose [connection info, Choose [disable] in [eye-fi trans

Using an Eye-Fi Card
156
Checking Connection Information
You can check the Eye-Fi card's access point SSID, or connection status.
Choose [Connection info].
∆
Press the
n button, then choose
[Eye-Fi Settings] from the
3 tab, and
press the
m button.
∆
Press the
op buttons or turn the – dial
to choose [Connection info], then press the
m button.
The Connection info screen will appear.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
∆
Press the
n button, then choose
[Eye-Fi Settings] from the
3 tab, and
press the
m button.
∆
Press the
op buttons or turn the – dial
to choose [Eye-Fi trans.], then press the
qr buttons to choose [Disable].
[Eye-Fi Settings] will only appear when the Eye-Fi card is inserted in the camera.
If the Eye-Fi card has a write-protect tab, you will not be able to check the
card's connection status, or disable Eye-Fi card transmission when the tab
is in the locked position.
What if [Eye-Fi Settings] does not appear?