Canon 300 HS - Manual (Page 102)

102
You can choose between three image quality settings.
Choose the image quality setting.
∆ After pressing the m button, press the
op buttons or turn the – dial to choose
, then press the m button.
Choose an option.
∆ Press the op buttons or turn the – dial
to choose an option, then press the m
button.
The setting will appear on the screen.
Image Quality Table
Estimated Shooting Time
Changing the Image Quality
Image Quality
(Recording Pixels/Frame Rate)
Content
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.
640 x 480 pixels, 30 frames/sec. For shooting standard quality movies.
320 x 240 pixels, 30 frames/sec.
Since the number of the recording pixels is smaller,
the image quality will appear coarse when
compared with
, but you can record three times
the length.
Image Quality
Shooting Time
4 GB 16 GB
20 min. 43 sec. 1 hr. 24 min. 54 sec.
43 min. 43 sec. 2 hrs. 59 min. 3 sec.
1 hr. 58 min. 19 sec. 8 hrs. 4 min. 30 sec.
• Based on Canon’s testing standards.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 10 minutes when shooting in , and
approximately 1 hour when shooting in or .
• Recording may stop even if the maximum clip length has not been reached on some
memory cards.
SD Speed Class 4 or higher memory cards are recommended.