Cabletron Systems FDDI Repeater - Manual (Page 29)

A-3
FPIM-05 and FPIM-07
FPIM-05 and FPIM-07
The FPIM-05 and FPIM-07 provide a Single-mode fiber connection. The FPIM-05
uses a MIC style connector and the FPIM-07 uses an SC type connector. The
specifications for both devices are listed in Table A-4.
The link distance is up to 40 kilometers (max) and 25 kilometers (typical) on
single mode fiber-optic cable as specified by ANSI SMF-PMD.
Table A-4. FPIM-05 and FPIM-07 Specifications
Parameter Typical Minimum Maximum
Transmitter Peak Wave
Length 1300 nm 1270 nm 1330 nm
Spectral Width 60 nm - 100 nm
Rise Time 3.0 nsec 2.7 nsec 5.0 nsec
Fall Time 2.5 nsec 2.2 nsec 5.0 nsec
Duty Cycle 50.1% 49.6% 50.7%
Bit Error Rate Better than 10 -10