Cabletron Systems FDDI Repeater - Manual (Page 15)

2-5
Setting the Module Card DIP Switch
Table 2-1. Function of DIP Switch
Switch Function Description On Off
Factory
Default
1 None Not Used. N/A N/A N/A
2 None Not Used. N/A N/A N/A
3
FNB-1
External
Ring
Specifies which ring is
externalized for FNB-1.
Primary Secondary Primary
4
FNB-2
External
Ring
Specifies which ring is
externalized for FNB-2.
Primary Secondary Primary
5
FNB-1
Status
The status of the FNB-1. Inserted Bypassed Inserted
6
FNB-2
Status
The status of the FNB-2. Inserted Bypassed Inserted
7
Restore
Defaults Restores module to the
original factory settings.
Toggle N/A N/A
8 Control
This switch determines
whether the module is
controlled by the DIP
switches or Local
Management.
Local
Management DIP
Switches Local
Management