Casio AX200 - Manual (Page 62)

www.axxessid.com
Installation & User Guide
AX200 Installation & User Guide – July 2007 6 2
Creating a new access group
Making a new access group is very easy and quick. All you have to do is to click on the “Add”
button and transfer the appropriate doors from the “Controller(s) available” list over to “Controllers
in group” list. In order to move an access point across; you can either double click on it or
highlight it and press the > button. Clicking on the >> button would transfer all the access points
at once.
When finished, type in a name for your group and click “Save”.
After saving, the software will automatically give your group and ID number.
Device Manager
Device manager displays all the devices that are or have been connected to the local network at
some point.
The PC server icon on the top opens the Server IP Configuration window where you can
configure the network settings of your PC. If the icon becomes red it means there is something
wrong with the network settings of the PC. This usually happens when the IP address of the
server is incorrect.