Casio DQ-584B User Manual
Casio Hardware
Operation Guide DQ-584/584B
ILLUSTRATION
•
A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.
•
Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.
Current time
(Hour, minutes)
Current temperature
Date
(month – day)
PM indicator
Alarm indicator
Alarm time
Snooze on indicator
Alarm on indicator
Alarm Off
HR (MONTH) or MIN (DATE)
button depressed
Snooze Alarm On
GENERAL GUIDE
1
1
1
1
1 SNOOZE/LIGHT button
•
Press this button to illuminate the display for about three seconds.
•
Pressing this button while the alarm is sounding stops the alarm.
2
2
2
2
2 12 • 24 HR (YEAR) button
•
Press this button to toggle between 12-hour and 24-hour timekeeping.
•
Pressing this button while “CALENDAR” is selected by the
Mode switch
5
advances the year setting.
3
3
3
3
3 MIN (DATE) button
•
Pressing this button while “TM” is selected by the
Mode switch
5
advances the minute setting.
•
Pressing this button while “CALENDAR” is selected by the
Mode switch
5
advances the day setting.
PM indicator
Hour Minutes
Press to toggle between
12-hour and 24-hour
timekeeping.
Press to advance the
minute setting.
Press to advance the
hour setting.
Year
Month Day
Press to advance the
year setting.
Press to advance the
day setting.
Press to advance the
month setting.
4
4
4
4
4 HR (MONTH) button
•
Pressing this button while “TM” is selected by the
Mode switch
5
advances the hour setting.
•
Pressing this button while “CALENDAR” is selected by the
Mode switch
5
advances the month setting.
5
5
5
5
5 Mode switch
NORMAL: For normal use
AL: For adjusting the alarm setting
TM: For adjusting the time setting
CALENDAR: For adjusting the date setting
6
6
6
6
6 Alarm Mode selector
SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off
7
7
7
7
7
°
C/
°
F button
Press this button to toggle the temperature units between Celsius and Fahrenheit.
8
8
8
8
8 Battery
SETTING THE CLOCK
1. Slide the
Mode switch
5
to
“TM”. This causes the current
time to flash on the display.
2. Use the
12 • 24 HR (YEAR)
button
2
,
MIN (DATE) button
3
, and
HR (MONTH) button
4
to set the time. Holding down
the
MIN (DATE) button
3
or
HR (MONTH) button
4
changes the corresponding
setting at high speed.
•
Make sure you set the correct
am/pm time if you are using 12-
hour timekeeping. The PM
indicator indicates PM times,
while nothing is indicated for AM
times.
•
The seconds count reverts to 00
automatically whenever you finish
adjusting the minute setting.
3. Slide the
Mode switch
5
to
“CALENDAR”. This causes the
current date to flash on the
display.
4. Use the
12 • 24 HR (YEAR)
button
2
,
MIN (DATE) button
3
, and
HR (MONTH) button
4
to set the date. Holding down
any button advances the
corresponding setting at high
speed.
•
You can set the year in the range
of 1990 to 2030.
5. Slide the
Mode switch
5
to “NORMAL”. This will
cause the figures on the display to stop flashing.
1
MA0507-EA