CyberHome Entertainment CH-DVD 635S - Manual (Page 21)

22
Audio connection to a receiver using the coaxial digital audio
output
At the back of the DVD player, there is a digital audio output socket “COAXI-
AL” for a coaxial cable.
This can be used to connect the following:
• an AV receiver or an AV amplifier with a digital multi-channel sound
decoder (MPEG-2, Dolby Digital, dts)
• a receiver with two channel digital stereo (PCM)
Have the following cable ready:
1. Coaxial cable (not supplied)
Connect the coaxial digital output with the corresponding input on the AV
receiver by means of a coaxial cable (not included in your accessory). The
coaxial digital audio output sends an encoded “RAW” digital audio signal to your
receiver for decoding. Please note that this connection is only possible if your
digital receiver is compatible to dts, Dolby Digital, MPEG and/or PCM.
RGB OUTPUT RGB OUTPUT AV CONNECTOR SCART AV CONNECTOR SCART
~100-230V AC IN ~100-230V AC IN
Pb / Cb Pb / Cb Y
S-VIDEO S-VIDEO VIDEO
5.1 CH ANALOG OUTPUT 5.1 CH ANALOG OUTPUT ANALOG OUTPUT ANALOG OUTPUT
OPTICAL COAXIAL R L P - SCAN / COMPONENT P - SCAN / COMPONENT FR SR SUB WOOFER SUB WOOFER FL SL CENTER
VIDEO OUTPUT VIDEO OUTPUT
ON
OFF
AC SWITCH AC SWITCH
Pr / Cr Pr / Cr
DIGITAL OUTPUT
2
AUDIO CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
I
O
RECEIVER
COAXIAL DIGITAL AUDIO INPUT
1
AUDIO AND VIDEO CONNECTIONS
ᕢ
What is digital multi-channel sound?
Digital multi-channel sound offers you a maximum of sound quality. You need a
multi-channel AV receiver or amplifier that supports at least one of the audio for-
mats of the DVD player (MPEG-2, Dolby Digital and dts). For the formats that
your receiver supports, refer to the manual of the receiver.
A loud distorted noise comes from your loudspeakers:
In this case the receiver is not suitable for the digital audio format of the DVD
player. Playback with 6 channel digital surround sound is only possible, if the
receiver has a digital multi-channel sound decoder.