Canon 350II - Manual (Page 48)

46
■ USER MODE ■
User mode setting functions
Power saver mode
When the MS350II has not been operated for a specified length of
time, the scanner switches into standby mode and stops project-
ing the image on the screen to save power consumption.
: Does not switch into the power saver mode.
: Switches into the power saver mode if not operated more
than 15 minutes. (set at the factory before shipping)
: Switches into the power saver mode if not operated more
than 60 minutes.
• Default of the power saver mode at factory shipping
is set to so that the unit switches into the power
saver mode if not operated more than 15 minutes.
• The power saver mode can be canceled by any key
operation.
• When the FS Controller I is attached, the unit can-
not switch into the power saver mode.
Hi-speed scanning
This feature is available in the DMP mode and enables you to
speed up scanning by simplifying the startup operation.
: Normal mode (set at the factory before shipping)
: Hi-speed scanning mode
In the hi-speed scanning mode, the scanner delivers
printouts of the images upside down.
Scanning resolution
When using the DMP mode, you can select one of the following
scanning resolutions.
: 600DPI
: 300DPI (set at the factory before shipping)
In the case of 600DPI resolution, “Picture mode” is dis-
abled even if selected. (
➞ P.42 “Setting the Print
mode”)
CE-IE-335-01 07.5.14, 14:20 46