Canon 350II - Manual (Page 21)

19
■ BEFORE YOU BEGIN ... ■
4. Turn the light adjustment dial to the left or right to adjust the
light intensity of the screen. Adjust the light intensity to the
type of lens installed.
Do not touch the contact area with your hands.
5. Slide the lens holder back into the unit. Support the holder
carefully so that the lens does not fall out.
6. Push the holder in until it clicks into place.
If you are using the FS Controller l, remove the lower
part of the lens
➀ then reverse it and attach it again
➁ .
CE-IE-335-01 07.5.14, 14:19 19