Canon 350II - Manual (Page 47)

45
■ USER MODE ■
USER MODE
In the user mode, you can arbitrarily change the settings of the
following features:
•
Power saver mode
• Hi-speed scanning mode
• Scanning resolution
• Cleaning mode
• Switching the operation modes (DMP mode/Scanner mode)
• Setting the function keys
User mode setting
1. Press the AE key about 2 seconds.
The LED of the AE key and the Print/Error display blink.
The power saving mode currently set will be displayed on the
Print/Error display.
2. Press the Brightness Adjustment key ( or ) to move the
blinking LED up to the point where a mode, of which settings
you want to change, is located.
Power saver mode
Hi-speed scanning mode
Scanning resolution
Cleaning mode
Switching the operation modes
(DMP mode/Scanner mode)
Setting the function keys (P1)
Setting the function keys (P2)
Setting the function keys (P3)
Setting the function keys (P4)
3. Press the Print Number Setting key ( + or – ) to select the set-
ting of each mode.
4. Press the Clear key to difine the setting.
CE-IE-335-01 07.5.14, 14:20 45