Canon 350II - Manual (Page 13)

11
■ BEFORE YOU BEGIN ... ■
About operation modes
The following operating modes are available with this scanner.
Select one of the following modes according to your system envi-
ronment before using the scanner. For details, contact your ser-
vice representative.
❏ Scanner mode
Using this scanner in connection with a personal computer, the
image projected on the scanner’s screen can be saved in the PC as
image data, or printed out through a printer connected to the PC.
❏ DMP mode
By installing the optional DMP board in the scanner and connect-
ing it to a DMP-dedicated printer, the MS350II can be used as a
digital microfilm printer (DMP). The image projected on the
scanner’s screen can be printed out through the DMP-dedicated
printer. In this case, no personal computer is required.
❏ Reader-printer mode
Using the CapturePerfect bundled with the MS350II, the scanner
that is set to the Scanner mode will operate as if it is set to the
DMP mode. The image projected on the scanner’s screen can be
printed out directly through a printer connected to the personal
computer. In this case, however, the image cannot be saved in the
PC as image data.
When the DMP board is installed in this scanner, switch
the “DMP mode” and “scanner mode” in the user mode
before use. (
➞ P.45 “USER MODE”)
If the computer is connected with the user mode set to
“DMP mode” when the DMP board is installed in this
scanner and the MS350II is used as a scanner, the
operation panel may not be operable or other prob-
lems may occur.
CE-IE-335-01 07.5.14, 14:19 11