Cecilware GB-IT User Manual

Page 13

27. If

the

Stop key is pressed the LCD/VFD screen will display the following:

RINSE LOCKOUT

## HRS.

28. If

the

Stop key is pressed the LCD/VFD screen will display the following:

WATER TEMP.

### DEG F

29. If

the

Stop key is pressed the LCD/VFD screen will display the following:

TEMP LOCKOUT

Off

30. If the ▼and ▲ keys are pressed Low Temperature Lockout will toggle between “on” and “off”.

31. If

the

Stop key is pressed the LCD/VFD screen will display the following:

LOW TEMP LOCKOUT

### DEG F

32. If

the

Stop key is pressed the LCD/VFD screen will display the following:

HOPPER STATUS

SELECT A KEY

33. Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding

Hopper to blink and the LCD/VFD screen will display the status for the indicated Hopper as

follows:

HOPPER STATUS

Off

34. If the ▼and ▲ keys are pressed the hopper status will toggle between “on” and “off”.

35. If

the

Stop key is pressed the LCD/VFD screen will display the following:

AUGER

STATUS

SELECT A KEY

36. Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding

Hopper to blink and the LCD/VFD screen will display the status for the indicated Auger as
follows:

AUGER STATUS

Off

37. If the ▼and ▲ keys are pressed the Auger Status will toggle between “on” and “off”.

38. If

the

Stop key is pressed the LCD/VFD screen will display the following:

MIX/DUMP STATUS

SELECT A KEY

39. Pressing any of the Dispense keys will cause the Dispense LED(s) of the corresponding

hopper to blink and the LCD/VFD screen will display the status for the indicated

Mixer/Dump Valve as follows:

MIX/DUMP STATUS

Off

40. If the ▼and ▲ keys are pressed the Mixer/Dump Valve Status will toggle between “on” and “off”.

41. If

the

Stop key is pressed the LCD/VFD screen will display one of the following:

DISPLAYED

UNITS ENGLISH

DISPLAYED

UNITSMETRIC

42. If the ▼and ▲ keys are pressed the Displayed Units will toggle between “English” and “Metric”.

43. If

the

Stop key is pressed the LCD/VFD screen will display the following:

RESET SYSTEM

ARE YOU SURE?

44. Pressing the ▼and ▲ keys simultaneously will cause all parameters to revert to default

values and the menu to display the following:

RESET SYSTEM

COMPLETED