Canon BJC-4400 - Manual (Page 48)

3-22 Paper Handling Chapter 3
Fabric Sheet FS-101
Fabric Sheet FS-101 for Canon printers comes with a booklet that
describes special handling procedures. Be sure to look through this
booklet for special information regarding the Fabric Sheets. This section
describes specific steps for using Fabric Sheets with the printer.
Be sure to follow these guidelines.
❍ To avoid paper jams, smearing, and other problems, do not open the
printer’s cover during printing.
❍ Use the fixing agent that comes with the Fabric Sheet FS-101.
❍ Do not touch newly printed fabric sheets until the ink is completely
dry. This takes about one hour.
Printing on a Fabric Sheet
❍ Make sure the paper thickness lever is to the right
position.
❍ Make sure the paper support and paper output tray are
extended.
Set up
the printer.