Canon Authorized Sen for ImageRUNNER Machines Version 4.1 - Manual (Page 167)

Authorized Send Installation and Configuration Guide for imageRUNNER Machines 167
6.2.4 Simple Authentication Notification Messages
This section explains the Simple authentication notification messages, along with
possible causes and remedies.
Message Cause Remedy
Check Public DN and
Public Password and try
again
The public DN and public
password have been configured
in the Configuration servlet,
however they are incorrect.
Verify the public DN and public
password.
Anonymous binding not
accepted by host (host)
The server does not allow
anonymous binding, and the
public DN and public password
are not configured in the
Configuration servlet.
• Verify that anonymous
connections are enabled on
the server.
• If anonymous connections
are required to be disabled,
configure the public DN and
public password credentials.
Confidentiality Required
The authentication server you
are using has a “Require
TLS/SSL” option enabled, and
Authorized Send is not using
SSL for authentication.
• Disable any “Require
TLS/SSL” options on the
authentication server.
• Enable SSL for
authentication in Authorized
Send. See
“Creating an
Authentication Server,” on
p. 49.