Canon Authorized Sen for ImageRUNNER Machines Version 4.1 - Manual (Page 115)

Authorized Send Installation and Configuration Guide for imageRUNNER Machines 115
Only Use Cherry G84 Select this check box if you want to only use the
Keyboard: Cherry G84 keyboard. By default, this check box is
selected.
NOTE
• The [Only Use Cherry G84 Keyboard] check box is
displayed only if the [Enable USB Keyboard input]
check box is selected.
• If a Cherry G84 keyboard and another HID are
connected to your machine at the same time, only
the Cherry G84 keyboard is functional for
Authorized Send.
• If the [Only Use Cherry G84 Keyboard] check box
is not selected and a non-keyboard HID is the only
device connected to your machine, you have no way
to input text into Authorized Send since the MEAP
virtual keyboard is not displayed.
• If the [Only Use Cherry G84 Keyboard] check box
is not selected and the [Enable USB Keyboard
input] check box is selected, any USB keyboard can
be used to input text, but only the Cherry G84
keyboard is supported. In this case, to avoid any
incompatibility issues between MEAP installed
applications and HID card readers, or other HIDs, it
is recommended that you select the [Only Use
Cherry G84 Keyboard] check box.
• The machine must be restarted each time you select
or clear the [Only Use Cherry G84 Keyboard] check
box for the change to take effect.
Configuration Session Enter the time in minutes until the Authorized Send
Timeout (min): Configuration servlet session times out. You can set
the timeout period between ‘1’ and ‘60’ minutes. The
default setting is ‘5’ minutes.
Network Socket
Enter the time in seconds until the connection to the
Timeout (seconds): authentication server and address book server times
out. You can set the timeout period between ‘1’ and
‘30’ seconds. The default setting is ‘5’ minutes.