Scanned area of a document, Problem documents, Letter/legal – Canon D680 User Manual

Page 25

3-2

Problem Documents

• Make sure any glue, ink, or correction fluid on the document is completely dry before placing it on the platen

glass or loading it into the ADF.

• Remove all fasteners (staples, paper clips, etc.) before loading the document into the ADF.
• To prevent document jams in the ADF, do not use any of the following:

Scanned Area of a Document

The shaded area in the illustration below shows the scanned area of a document. Make sure your document’s text
and graphics are within this area.

• The scanning limit of documents set on the platen glass will differ depending on the MAX. SCAN

LENGTH

of 330 mm or 356 mm specified in COPY SETTINGS of the Additional Functions.

NOTE

Wrinkled or creased paper

Curled or rolled paper

Torn paper

Carbon paper or carbon-

backed paper

Coated paper

Onion skin or thin paper

MAX. 0.08”
(MAX. 2.0 mm)

MAX. 0.16”
(MAX. 4.0 mm)

MAX. 0.08”
(MAX. 2.0 mm)

Letter/Legal

MAX. 0.08”
(MAX. 2.0 mm)

SCANNING

DIRECTION