beautypg.com

5 load balance (advanced mode only) – Cradlepoint IBR600 User Manual

Page 95

background image

CRADLEPOINT

IBR600 | USER MANUAL Firmware ver. 3.3.0

© 2011 CRADLEPOINT, INC. PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 93

7.5 Load Balance (Advanced Mode only)

When enabled in Connection Manager (Internet

→ Connection Manager), the router will use multiple WAN interfaces

to increase the data transfer throughput by using any connected WAN interface consecutively. Connections are load
balanced between interfaces based on a dynamic measurement of bandwidth available.

Leave ―Use default rates‖ selected for automatically defined bandwidth values for Load Balance.

The default minimum rate can be changed to reflect the minimum bandwidth used during dynamic measurement. The
dynamic measurement will assume that the interface has at least the specified minimum bandwidth available. You have
the ability to set these minimum rates for:

4G Modem

Ethernet

3G Modem

WiFi

Range: 100-50000 Kbs.