Cradlepoint IBR600 User Manual

Page 67

CRADLEPOINT

IBR600| USER MANUAL Firmware ver. 3.3.0

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 65

6.7.3

Local Network Interfaces

Each LAN type

—WiFi, Ethernet, and VLAN—has a separate section with configuration options. Unless the default

configuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired
interface options for a network. You can then select these interfaces to add to a network in the Local Network Editor
(see above).

Select from the following tabs:



Wireless (WiFi) Network Settings



Ethernet Port Configuration



VLAN Interfaces

Wireless (WiFi) Network Settings

The IBR600 can broadcast two SSIDs
(service set identifiers

— the names for

WiFi networks). One primary WiFi network
is enabled by default, while you may have
enabled a second guest network when
using the First Time Setup Wizard. You
have the ability to change the settings for
either of these networks.

Wireless Radio: Enable/Disable. (Default:
Enabled). Leave enabled unless you don‘t
want any WiFi networks broadcast from your router.

Select a WiFi network and click Edit to change the settings.