Cradlepoint IBR600 User Manual

Page 10

Text mode
Original mode

CRADLEPOINT

IBR600 | USER MANUAL Firmware ver. 3.3.0

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 8

Reset: You can return your router to factory default settings by pressing and holding the Reset button. This button is
recessed, so it requires a pointed object such as a paper clip to press. Press and hold for 10 seconds to initiate reset.

Ethernet Ports: By default, the IBR600 has one WAN (Wide Area Network

—your internet source) port and one LAN

(Local Area Network) port. Each of these ports can be reconfigured, however, if you need two LAN or two WAN Ethernet
ports.

Ethernet LED:



Solid Green

– connected



Blinking Green

– data transfer activity

Micro USB: This port can be used to attach a direct firmware upgrade to enable manual firmware upgrades if necessary.