Canon LV-7275 EN - Manual (Page 73)

6
. Usng On-Screen Menu
❼ Menu Descriptions & Functions [Information]
Displays the status of the lamp / filter, the current signal, the wired LAN, and the version. This item has four pages.
The information included is as follows:
NOTE: Pressing the INFO button on the remote control will show the [Information] menu items.
[Usage time]
[Remaining lamp time] (%) [Lamp counter] (H)
[Filter counter] (H)
Remanng Lamp Tme/Lamp Counter
The projector has the Quiet mode. The lamp life varies depending on two modes: quiet mode and normal mode.
The [Remaining lamp time] shows the percentage of remaining bulb life. The [Lamp counter] shows the amount of
lamp usage (hours).
• When the remaining lamp time reaches 0%, the “Replace with the new lamp.” message will be displayed. Re-
place with the new lamp.
See page 69 for lamp replacement.
• The message for lamp replacement will be displayed under the following conditions:
- one minute after the projector has been powered on.
- when the POWER button on the projector cabinet or on the remote control is pressed.
To cancel the message, press any button on the projector cabinet or the remote control.
• When the remaining lamp time reaches 0%, the Remaining lamp time bar indicator changes from 0% to 100(H)
in red and starts counting down.
When the remaining lamp time reaches 0 hours, the projector will not turn on.
Lamp lfe(H)
Replacement lamp
Normal Quet
3000 4000 LV-LP31