Canon LV-7275 EN - Manual (Page 52)

Alert Mal Settng
http:// /lanconfig.html
This option notifies your computer of an error message via e-mail when using wired LAN. An error message
notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the
projector.
HOST NAME ............................ Type in the hostname of the network connected to the projector. Up to 60 alphanumeric
characters can be used. If the host name is unknown, type in a string of characters repre-
senting the projector. Example: Projector 1
DOMAIN NAME ....................... Type in the domain name of the network connected to the projector. Up to 60 alphanumeric
characters can be used. If the domain name is unknown, type in the right side of @ in the
sender's address. Example: canon.com
ALERT MAIL ............................. Checking [ENABLE] will turn on the Alert Mail feature.
Checking [DISABLE] will turn off the Alert Mail feature.
SENDER’S ADDRESS ............... Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.
SMTP SERVER NAME .............. Type in the SMTP server name to be connected to the projector. Up to 60 alphanumeric
characters can be used.
RECIPIENT’S ADDRESS 1 to 3 ... Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be
used.
APPLY ...................................... Click this button to reflect the above settings
EXECUTE .................................. Click this button to send a test mail to check if your settings are correct.
STATUS .................................... A reply to a test mail will be displayed.
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if the network settings are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient ’s
Address is correct
TIP: The Alert Mail settings will not be affected even when [Reset] is done from the menu.
. Convenent Features