Culligan HD-726 - Manual (Page 7)

Culligan
®
MVP Designed With The Ease
of 24-volt Operation.
“Hey Culligan Man!”
®
, Aqua-Sensor, www.culligan.com and Hey Culligan Man are trademarks of Culligan International Company.
ISO 9001
Certification
Check for compliance with state and local laws and regulations. Do not use with water
that is microbiologically unsafe or of unknown quality without adequate disinfection
before or after the system. Systems certified for cyst reduction may be used on disinfected
waters that may contain filterable cysts.
* Aqua-Sensor: Patent # US 5,699,272
** Progressive Flow: Patent # US 5,060,167 , # US 5,351,199
corporate campuses
educational facilities
food service
grocery
hotel/hospitality
laundry
vehicle wash
MVP
Controller
• Battery Backup - The optional battery backup
will maintain the time of day for a minimum of 4
weeks using a 3.6V 1/2AA-lithium type battery as
supplied by Culligan.
• Regeneration Start Delay - A user determined
number of hours (up to 9) can be input for the
purpose of increasing time between multiple
regeneration initiations.
• Auxillary Input - capable of accepting a remote
signal from a dry contact device such as an
operator push-button for the purpose of
initiating the regeneration sequence.
• Segmented Brine Draw/Rinse Cycle - Brine
Reclaim Capability - allows the user to configure
the system for brine reclaim with a minimum of
additional valves and/or other types of hardware.
Power Source
Electrical power required
for the control is 24-volt
50/60 Hz AC current. A
plug-in transformer
(120v/24v) is provided.
Lock/Unlock
Allows the control to be easily
locked out from inadvertent
program changes or abuse.
Time of Day
Displays time in 12 hour
(AM/PM) or 24 hour formats.
EEPROM
Saves programmed and
statistical functions.
One-Touch Program Update
Update multiple controls
through the touch of a button
on the primary control.
Multi-Unit Communication Input/Output (RS485)
The communication input/output feature routinely
recognizes when another controller within a
multiple controller system is in a regeneration
sequence, prohibiting the chance of multiple units
regenerating simultaneously.
Program Beeper
Emits an audible beep
when key pads are
depressed to help identify
valid (short beep) or
invalid (3 short beeps)
key pad touches. Can be
enabled or disabled as
desired.
Screen Blanking
Allows the screen to go
blank once programming
is complete (After 5
minutes of no keypad
activity).
Additional MVP Features
www.culligan.com
1-800-CULLIGAN
©2003 Culligan International Co.
Printed in USA (5/03)
MOORE PART NO. 46968