Culligan’s hi-flo, 55e commercial filters, Hey culligan man – Culligan HD-726 User Manual
Page 2: System specifications, Applications and benefits, Options, Warranty
Culligan’s Hi-Flo
®
55e Commercial Filters
www.culligan.com
™
1-800-CULLIGAN
©2003 Culligan International Co.
Printed in USA (12/03)
MOORE PART NO. 47601
“Hey Culligan Man!”
®
Products manufactured and marketed by Culligan International Company (Culligan) and its affiliates are protected by patents issued or pending in the United States and other
countries. Culligan reserves the right to change the specifications referred to in this literature at any time, without prior notice. , Brunermatic, Hey Culligan Man,
Culligan Man, Culligan Commercial @ Work, www.culligan.com and Culligan Service Network are trademarks of Culligan International Company or its affiliates.
ISO 9001
Certification
HD-202
22
2
33
3
44
5
30
2
HD-242
32
2
48
5
63
7
45
2
HD-302
50
4
74
7
99
12
70
2
HD-362
71
5
107
11
142
19
100
2
HD-423
97
3
145
6
193
9
135
3
HR-202
19
1
0
1
14
1
18
2
2
2
20
2
HR-242
13
1
1
1
19
1
26
2
2
2
30
2
HR-302
20
1
2
1
30
1
40
2
3
2
45
2
HR-362
29
1
2
1
42
4
57
2
6
2
70
2
HR-422
39
1
3
1
58
5
77
2
8
2
100
2
Model
Flow Rate
(GPM)
Pressure
Loss (PSI)
Flow Rate
(GPM)
Pressure
Loss (PSI)
Flow Rate
(GPM)
Pressure
Loss (PSI)
Backwash
Flow Rate
(GPM)
Valve
Size
(inches)
Superior
*
*
Superior – Best quality water with lowest pressure loss. Recommended for influent suspended solid loads up to and greater than 300 ppm.
**
High – Very good quality water with increased pressure loss. Recommended for influent suspended solid loads less than 300 ppm.
***
Utility – Satisfactory quality water with greatest pressure loss. Shorter on line time between backwashing. Recommended for influent suspended solid
loads less than 150 ppm.
1
For Sediment and organic removal use the flow rates from the superior water quality column.
2
For chlorine removal only, use the flow rates from the utility water quality column.
All pressure drop figures are based on new filter media and a water temperature of 60°F.
Depth filters are capable of 10 micron effluent water quality, whereas all other filter types are capable of 40 micron effluent water quality.
Water Quality
High
**
Utility
***
Depth Filt
ers
Car
b
on Filt
ers
System Specifications
Pressure:
30–100 psig
207–690 kPa
Power:
120 VAC/24 VAC
50/60 Hz
Temperature:
40–120°F
4–49°C
Applications and Benefits
• Food and Beverage–Superior taste and increased
cost savings.
• Drinking Water–Reduces turbidity and chlorine;
improves taste and clarity.
• Boilers—Turbidity reduction, minimize sludge
blowdown.
• Light Industry Processes—Reduces particulate matter.
• Pretreatment—For softeners, RO’s and DI systems.
• Vehicle Wash—Turbidity reduction.
Options
• Patented Progressive Flow-
Culligan’s MVP™ controller can
monitor flow demands, bringing
additional tanks on-line or off-line
as flows increase or decrease.
• Differential Pressure Switch
• A.S.M.E. Code Tanks
• Sample cocks and pressure gauges
• Separate source regeneration kits
• Skid mounting
• Flow meter
Warranty
Culligan’s Hi-Flo 55e water filters are
backed by a limited 1-year warranty
against defects in material,
workmanship and corrosion. In
addition, tanks carry a limited 5-year
warranty.*
* See printed warranty for details.
Culligan will provide a copy of the
warranty upon request.