beautypg.com

Distance setting (acc only), Changing modes (acc only) – Dodge 2015 Challenger - User Guide User Manual

Page 45

background image

• The ACC system maintains set speed when driving up hill and down hill. However, a

slight speed change on moderate hills is normal. In addition, downshifting may occur
while climbing uphill or descending downhill. This is normal operation and necessary
to maintain set speed. When driving up hill and down hill, the ACC system will cancel
if the braking temperature exceeds normal range (overheated).

Distance Setting (ACC Only)

The specified following distance for ACC can be set by varying the distance setting
between four bars (longest), three bars (long), two bars (medium) and one bar (short).
Using this distance setting and the vehicle speed, ACC calculates and sets the distance
to the vehicle ahead. This distance setting displays in the DID.
• To increase the distance setting, push the Distance Setting—Increase button and

release. Each time the button is pushed, the distance setting increases by one bar
(longer).

• To decrease the distance setting, push the Distance Setting—Decrease button and

release. Each time the button is pushed, the distance setting decreases by one bar
(shorter).

Changing Modes (ACC Only)

If desired, the Adaptive Cruise Control mode can be turned off and the system can be
operated as a normal (Fixed Speed) Speed Control mode. When in the normal (Fixed
Speed) Speed Control mode the distance setting feature will be disabled and the system
will maintain the speed you set.
• To change between the different cruise control modes, push the ADAPTIVE CRUISE

CONTROL (ACC) ON/OFF button which turns the ACC and the normal (Fixed Speed)
Speed Control OFF.

• Pushing the normal (Fixed Speed) SPEED CONTROL ON/OFF button will result in

turning ON (changing to) the normal (Fixed Speed) Speed Control mode.

Refer to your Owner's Manual on the DVD for further information.

O P E R AT I N G Y O U R V E H I C L E

43