Srt performance features, Driver information display (did), 60 mph (0-100 km/h) duration – Dodge 2015 Challenger - User Guide User Manual
Page 152: S r t
SRT PERFORMANCE FEATURES
Driver Information Display (DID)
• The DID can be used to program the
following Performance Features. Press
and release the UP
or DOWN button
buttons until Performance Features
displays. Press the RIGHT
button to
change the setting.
SRT Performance Sub Menu Items
• 0-60 mph (0-100 km/h) Duration
• Current G-Force
• 0-100 mph (0-160 km/h) Duration
• Peak G-Force
• 1/8 Mile Duration
• Lap Timer
• 1/4 Mile Duration
• Lap History
• Braking Distance
• Top Speed
The following describes each feature and its operation:
0-60 mph (0-100 km/h) Duration
When selected, this screen displays the time it takes for the vehicle to go from 0 to
60 mph (0 to 100 km/h) within 10 seconds.
• The feature will “ready” when the vehicle speed is at 0 mph (0 km/h). The word
“READY” will flash when conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 60 mph (100 km/h) in less then 10
seconds.
• The time will continue to display until the
OK button is pushed.
• Pushing the
OK button will clear the current run time and display the vehicle's best
0-60 mph (0-100 km/h) time.
• To clear the vehicle's best 0-60 mph (0-100 km/h) time, push and hold the
OK button
for five seconds.
1 — DID Controls
S R T
150