Dodge 2015 Challenger - User Guide User Manual
Page 163
Vehicles Equipped With Passive Entry
• Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (Do not start the engine).
• Push and release the
DOWN
arrow button to scroll downward through the main
menu to “Vehicle Info.”
• Push and release the
RIGHT
arrow button to access the ”Oil Life” screen.
• Push and hold the
RIGHT
arrow button for one second to access the ”Oil Life Reset”
screen.
• Push and hold the
DOWN
arrow button until the screen shows 100% oil life.
• Push and release the
Up arrow button to exit the DID screen.
Vehicles Not Equipped With Passive Entry
• Without pushing the brake pedal, cycle the ignition to the ON/RUN position (Do not
start the engine).
• Push and release the
DOWN
arrow button to scroll downward through the main
menu to “Vehicle Info.”
• Push and release the
RIGHT
arrow button to access the “Oil Life” screen.
• Push and hold the
RIGHT
arrow button for one second to access the “Oil Life Reset”
screen.
• Push and hold the
DOWN
arrow button until the screen shows 100% oil life.
• Push and release the
Up arrow button to exit the DID screen.
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this procedure.
Resetting The Light After Servicing
Vehicles Equipped With Keyless Enter-N-Go™
1. Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (do not start the engine).
2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.
3. Without pushing the brake pedal, push the ENGINE START/STOP button once to
return the ignition to the OFF/LOCK position.
Vehicles Not Equipped With Keyless Enter-N-Go™
1. Turn the ignition switch to the ON/RUN position (do not start the engine).
2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat this procedure.
W H AT T O D O I N E M E R G E N C I E S
161