Canon SX7 MARKII - Manual (Page 94)

94
SE
TTING
UP FU
NCTIO
N
S FROM MEN
U
S
Adjusting the Horizontal Position
[Horizontal position]
You can adjust the horizontal position of the
screen when the projected image is shifted in
the horizontal direction.
T
T
T
Press the [MENU] button when you finish.
Adjusting the Vertical Position
[Vertical position]
You can adjust the vertical position of the screen
when the projected image is shifted in the verti-
cal direction.
T
T
T
Press the [MENU] button when you finish.
Display settings
Input signal settings
Horizontal position
Moves the screen to the right.
Moves the screen to the left.
z Perform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
z The setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
<
Display settings
Input signal settings
Vertical position
Moves the screen up.
Moves the screen down.
z Perform this adjustment if the auto PC
adjustment function cannot adjust the
project image correctly.
z The setting is recorded for [ANALOG
PC-1] and [ANALOG PC-2] sepa-
rately.
ANALOG PC
>
<