Canon SX7 MARKII - Manual (Page 52)

52
PROJ
ECTIN
G
AN IMAGE
FROM TH
E COMPUT
ER
Adjusting Keystone Distortion
The Auto setup function (Auto keystone) automatically adjusts the keystone distortion in a
longitudinal direction. Follow the steps below if the function does not adjust the distortion
appropriately or you want to adjust the keystone distortion in a horizontal direction.
1
Press the [KEYSTONE] button.
The [Keystone adjustment] windows appears.
2
Press the POINTER buttons to adjust the focus.
z You can activate the Auto keystone function if you press the [AUTO SET] button now.
To reduce the length of the
upper edge, press [ ].
<
To reduce the length of the
lower edge, press [ ].
<
To reduce the length of the left
edge, press [<]. To reduce the length of the
right edge, press [>].