Removing the jack and tools, Removing the spare tire, Roadside emergencies – FORD 2010 Explorer v.2 User Manual
Page 321
Removing the jack and tools
1. Open liftgate and remove the
carpeted floor lid.
2. Turn jack screw eyelet (1)
counterclockwise to release
pressure.
3. Rotate the locking pin (2)
clockwise until loose then pull out
until it stops and remove the jack
and tool bag from the bracket.
4. Remove the chock and jack tools
from the provided bag rotate the
wrench socket out from the handle.
Removing the spare tire
Do not use an impact wrench on the winch drive nut. This will
damage the spare tire winch.
1. Open the cover from the
carpeting on cargo floor to expose
the winch drive nut.
Roadside Emergencies
321
2010 Explorer (exp)
Owners Guide, 2nd Printing
USA (fus)
This manual is related to the following products: