FORD 2010 Explorer v.2 - Manual (Page 130)

Reducing speed while using speed control
There are two ways to reduce a set
speed:
• Press and hold the SET - control
until you get to the desired
speed, then release the control.
You can also use the SET -
control to operate the tap-down
function. Press and release this
control to decrease the vehicle
set speed in small amounts by
1 mph (2 km/h).
• Press the brake pedal until the desired vehicle speed is reached, press
the SET + control.
Turning off speed control
There are two ways to turn off the speed control:
• Press the brake pedal. This will not erase your vehicle’s previously set
speed.
• Press the speed control OFF
control.
Note: When you turn off the speed
control or the ignition, your speed
control set speed memory is erased.
Driver Controls
130
2010 Explorer (exp)
Owners Guide, 2nd Printing
USA (fus)