Locking the doors/liftgate, Opening the liftgate window, Car finder – FORD 2010 Explorer v.2 User Manual
Page 157: Sounding a panic alarm, Locks and security
Locking the doors/liftgate
1. Press
and release to lock all the doors and liftgate. The lamps will
flash. Note: If any door, the liftgate or the liftgate window are not closed
properly, the lamps will not flash.
2. Press
and release again within three seconds to confirm that all the
doors are closed and locked. Note: The doors will lock again, the horn
will chirp and the lamps flash once.
Note: If any door, the liftgate or the liftgate window are not closed
properly, the horn will make two quick chirps.
Opening the liftgate window
Press
to unlatch the liftgate window.
Car finder
Press
twice within three seconds. The horn will chirp and the turn
lamps will flash. It is recommended that this method be used to locate
your vehicle, rather than using the panic alarm.
Sounding a panic alarm
Press
to activate the alarm. The horn will sound and the parklamps
will flash for a maximum of three minutes. Press again or turn the
ignition to the on position to deactivate, or wait for the alarm to timeout
in three minutes.
Note: The panic alarm will only operate when the ignition is in the off
position.
Memory seats and adjustable pedals feature (if equipped)
The remote entry system can also control the memory seat/adjustable
pedals/easy entry-exit feature.
Press
to automatically move the seat and adjustable pedals to the
desired memory position (the seat position corresponds to the
transmitter being used).
Locks and Security
157
2010 Explorer (exp)
Owners Guide, 2nd Printing
USA (fus)