beautypg.com

Speed control, Setting speed control, Driver controls – FORD 2010 Explorer v.2 User Manual

Page 128

background image

WARNING: Turn off the running boards before jacking or
placing any object under the vehicle. Never place your hand

between the extended running board and the vehicle. A moving
running board may cause injury.

SPEED CONTROL
With speed control set, you can maintain a set speed without keeping
your foot on the accelerator pedal.

WARNING: Do not use the speed control in heavy traffic or on
roads that are winding, slippery or unpaved.

Setting speed control

The controls for using your speed
control are located on the steering
wheel for your convenience.

1. Press the ON control and release
it.

2. Accelerate to the desired speed.

3. Press the SET + control and
release it.

4. Take your foot off the accelerator
pedal.

5. The indicator light

on the

instrument cluster will turn on.

Note:
• Vehicle speed may vary momentarily when driving up and down a

steep hill.

• If the vehicle speed increases above the set speed on a downhill, you

may want to apply the brakes to reduce the speed.

Driver Controls

128

2010 Explorer (exp)
Owners Guide, 2nd Printing
USA
(fus)

This manual is related to the following products: