beautypg.com

Power steering fluid, Brake fluid, Maintenance and specifications – FORD 2010 Expedition v.3 User Manual

Page 399

background image

POWER STEERING FLUID

Check the power steering fluid. Refer to scheduled maintenance
information.

1. Start the engine and let it run
until it reaches normal operating
temperature (the engine coolant
temperature gauge indicator will be
near the center of the normal area
between H and C).

2. While the engine idles, turn the
steering wheel left and right several
times.

3. Turn the engine off.

4. Check the fluid level in the reservoir. It should be between the MIN
and MAX lines. Do not add fluid if the level is in this range.

5. If the fluid is low, add fluid in small amounts, continuously checking
the level until it reaches the range between the MIN and MAX lines. Be
sure to put the cap back on the reservoir. Refer to Maintenance
product specifications and capacities
in this chapter for the proper
fluid type.

BRAKE FLUID

The fluid level will drop slowly as
the brakes wear, and will rise when
the brake components are replaced.
Fluid levels between the MIN and
MAX lines are within the normal
operating range; there is no need to
add fluid. If the fluid levels are
outside of the normal operating
range, the performance of the
system could be compromised; seek
service from your authorized dealer
immediately.

Maintenance and Specifications

399

2010 Expedition (exd)
Owners Guide, 3rd Printing
USA
(fus)

This manual is related to the following products: